And that’s building a lego table all done, and relocated to the gallery. Time to put the containers in and fill them up with Lego Happy customers 😎
Category: DIY
Building a Lego Table – Attaching the base plates
What better use for a spare solar inverter than holding the base plates down. 😎
Share this:
Building a Lego Table – The Painting
Table sanded back and holes patched: Undercoat/Sealant applied: The legs and underside painted red: The top painted green. The paint is self-leveling so most of those ripples should disappear:
Share this:
Building a Lego Table – Construction
Timber from Bunnings cut to length: Started to frame up the table top to attach the legs: First leg attached: All done: I’ve left some weights against the legs to straighten them up. The table is starting to take shape though. Next step is to putty the screw holes, sand and apply […]
Share this:
Building a Lego Table – A Slight Design Change
Bought some timber from the concept drawings and had a quick play with the layout. I’ve redesigned with some subtle changes but the table should be a little more solid than before. The new design loses the 2-sided drawer look in favour for table top containers and a larger one where the drawers would have […]
Share this:
Building a Lego Table – Concept Design
Like others, after spending a little time looking around for a good LEGO table I came up with nothing really suitable for my 2.5 and 4.5 year old boys. So, with some design tips from my wife I embarked on a short DIY project. The goal is to build a good size table that can […]
Share this:
My 4ft MakersLED Part 3 (final)
Finally found some time to finish off this project. Pretty happy with the results. 😎 The daylight controller in action
Share this:
My 4ft MakersLED Part 2
A little more progress tonight. The LEDs are all wired up into 4 segments. The lenses are attached and a test run was done with power.
Share this:
Quick change of colours in the nano LED
I was finding the nano LED a little too blue so I swapped the blues out for some cool whites. Before: After:
Share this:
My 4ft MakersLED Part 1
I finally got around to ordering from RapidLED last week and my parcel arrived on Friday. As I found time over the weekend, I did a little work on the system. My order from Rapid was a solderless 48 LED dimmable kit with daylight controller. It’s a good thing I took my time with ordering […]
